Description of Goods
White powder flux
Availability
Separate impurities from foundry aluminium and aluminium alloys,dry dross, and easily remove the dross from the molten aluminium.
Directions for use
After refining treatment,there will be some oxide impurities and bubbles on the surface of molten,sprinkle the dross-off flux on the surface at that time.To mix it carefully only on the upper part of the melt,don’t stop until the dross turns into the dry white powder.Puddle the dross with a skimmer.
For the best results the melt should preferably be 680-750℃.
Application rate：
0.15~0.25%of the molten aluminium.
|
HUAYU Dross-off flux HYD-1 |
|
Easy working. |
|
Separate the dross from the melt efficiently. |
|
Minimise metal loss in drosses,and can be used to recover metal from hot drosses |
|
Low costs,economic benefit. |
Packaging：1kg/bag or 2kg/bag 20kg/carton
Storage：To be stored in a dry warehouse.
Valid date：12 months
Material safety data
|
Appearance：white powder |
|
Density：1.1-1.3g/cm3 |
|
Mesh size：-14um |
