Description of Goods
White powder flux
Availability
Separate impurities from aluminium and
Aluminium alloys,dry the dross,and easily remove the dross from the molten aluminium.
Directions for use
After refining treatment,there will be some oxide impurities and bubbles on the surface of molten,sprinkle the dross-off flux on the surface at that time.To mix it carefully only on the upper part of the melt,don¡¯t stop until the dross turns into dry white powder.Puddle the dross with a skimmer.For best results the melt should preferably be 700-740¡æ.
Application rate£º
0.15-0.25% of the molten aluminium.
HUAYU Dross-off flux HYDZ-11 |
Easy working |
Separate the dross from the melt efficiently. |
Minimise metal loss in drosses,and can be used to recover metal from hot drosses. |
l Low costs,economic benefit |
Packaging£º2kg/bag 20kg/carton
Storage£ºTo be stored in a dry warehouse.
Valid date£º12 month
Material safety data:
Appearance£ºwhite powder |
Density£º1.1-1.3g/cm3 |
Mesh size£º-14um |